EPO-TEK Logo

count

FAQs - Technical Service

Please refer to EPO-TEK Tech Tip 5:  files/Techtips/pdfs/tip5.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 1 & 2:  files/Techtips/pdfs/tip1.pdf & files/Techtips/pdfs/tip2.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 6:  files/Techtips/pdfs/tip6.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 4:  files/Techtips/pdfs/tip4.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 8:  files/Techtips/pdfs/tip8.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 12:  files/Techtips/pdfs/tip12.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 14:  files/Techtips/pdfs/tip14.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 22:  files/Techtips/pdfs/tip22.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 23:  files/Techtips/pdfs/tip23.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

No.  EPO-TEK H20E is a two component, heat curing epoxy that requires a minimum of 80°C to cure properly. 

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

No.  EPO-TEK 353ND is a two component, heat curing epoxy that requires a minimum of 80°C to cure properly. 

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

This is likely a super-therm or large exotherm.  Please refer to EPO-TEK Cure Matters for cure profile recommendations:  files/brochures/pdfs/Cure_Matters_Final.pdf

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Ketones and alcohols are best for cleaning wet epoxy. 

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

EPO-TEK MSDS's can be located in the Products section of our website.  Please select the product category or application and the MSDS can be downloaded by clicking the MSDS button in the far right column.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Yes.  Epoxy Technology also offers epoxies containing graphite, nickel and copper.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

 

FAQ
star
For additional product selection assistance,
tell us about your application and its specific design criteria and a technical service representative will contact you directly.
Spotlight
Featured Products
Press Releases
EPO-TEK Blog Posts
Video Tutorials
  1. FAQs

  2. USA Tradeshows

    USA Tradeshows

    United States
    Date Event Booth Location
  3. GLOBAL Tradeshows

    International Tradeshows

    China
    France
    Germany
    India
    Italy
    Japan
    Korea
    Malaysia
    Philippines
    Singapore
    Spain
    sweden
    Switzerland
    Taiwan
    Thailand
    Turkey
    UK
    Vietnam
    Date Event Booth Location
led.jpg

This website stores cookies on your computer. These cookies are used to improve your website and provide more personalized services to you, both on this website and through other media. To find out more about the cookies we use, see our Privacy Policy.