EPO-TEK 50th gold Logo


Please select your question category

Please refer to EPO-TEK Tech Tip 5:  files/Techtips/pdfs/tip5.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 1 & 2:  files/Techtips/pdfs/tip1.pdf & files/Techtips/pdfs/tip2.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 6:  files/Techtips/pdfs/tip6.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 4:  files/Techtips/pdfs/tip4.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 8:  files/Techtips/pdfs/tip8.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 12:  files/Techtips/pdfs/tip12.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 14:  files/Techtips/pdfs/tip14.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 22:  files/Techtips/pdfs/tip22.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Please refer to EPO-TEK Tech Tip 23:  files/Techtips/pdfs/tip23.pdf.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

No.  EPO-TEK H20E is a two component, heat curing epoxy that requires a minimum of 80°C to cure properly. 

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

No.  EPO-TEK 353ND is a two component, heat curing epoxy that requires a minimum of 80°C to cure properly. 

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

This is likely a super-therm or large exotherm.  Please refer to EPO-TEK Cure Matters for cure profile recommendations:  files/brochures/pdfs/Cure_Matters_Final.pdf

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Ketones and alcohols are best for cleaning wet epoxy. 

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

EPO-TEK MSDS's can be located in the Products section of our website.  Please select the product category or application and the MSDS can be downloaded by clicking the MSDS button in the far right column.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Yes.  Epoxy Technology also offers epoxies containing graphite, nickel and copper.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

 

No.  Epoxy Technology does not offer any products that have been approved for a UL94 V-0 rating.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Yes.  See EPO-TEK Tech Tip 19:  files/Techtips/pdfs/tip19.pdf for some general guidelines.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

Yes, but we choose products by application first in addition to matching performance properties stated on competitors data sheets.  Please consult our Application Experts at (978) 667-3805 or techserv@epotek.com to discuss your specific requirements.

The main difference between the 2.5 W/mK and 29 W/mK thermal conductivity values listed on the data sheet for EPO-TEK H20E is test method. 

The first value of 2.5 W/mK was measured using our standard laser flash test equipment, in accordance with ASTM E1461.  This involves using a disk of material that is approximately 12.55mm in diameter and 1mm in thickness.  It provides a bulk property and does not reflect the actual performance of the material in a given assembly.

The second value, 29 W/mK, reflects actual measured circuit value from a power TO-18 device.  This was back calculated using the thermal resistance determined in the device with a 2mm x 2mm chip and a 75um bond line.

It may be settling of the filler which can be a common phenomenon.  Most of the time, the filler can be incorporated back in with some gentle mixing.  It is good practice to stir a filled system before each use to ensure the filler is evenly dispersed within the epoxy matrix before using.  A method for preventing this filler settling, is to store the closed epoxy container on a jar roller to keep the material evenly suspended within the system.

If you have additional questions, please consult our Application Experts at (978) 667-3805 or techserv@epotek.com.

All RFQ's and PO's should be e-mailed to:  customerservice@epotek.com where you will receive an e-mail confirmation once we have received your request.

You may also choose to call our main number (978) 667-3805 and ask for Customer Service.  

Our fax line is available at (978) 663-9782.

Currently, we do not offer ordering online. 

Here is our ordering information sheet: EPO-TEK Ordering Information.pdf

P.O. Box 5963

Springfield, MA  01101-5963

All RFQ's and PO's should be e-mailed to:  customerservice@epotek.com where you will receive an e-mail confirmation once we have received your request.

You may also choose to call our main number (978) 667-3805 and ask for Customer Service.

Our fax line is available at (978) 663-9782.

Currently, we do not offer ordering online.

Epoxy Technology provides distribution in most countries outside of the United States. 

For locating your nearest EPO-TEK official distributor, please visit the Find Your Nearest Representative or Distributor area on our home page under Contact Us.

Our cage code is 33246.

Yes.  We accept MasterCard, VISA and American Express.

Epoxy Technology uses UPS or Federal Express for shipment of our products. 

Please provide your account number when placing your order or you may choose to use our account and have the charges billed to you.

Our standard lead time is 10 business days to ship after receiving your order.  Please allow 15 business days for syringe or bi-pak re-packaging, product testing, Certificate of Analysis requests and any custom formulated product.

Please contact our Customer Service department at (978) 667-3805 or customerservice@epotek.com.

All RFQ's and PO's should be e-mailed to:  customerservice@epotek.com where you will receive an e-mail confirmation once we have received your request.

You may also choose to call our main number (978) 667-3805 and ask for Customer Service.  

Our fax line is available at (978) 663-9782.

Currently, we do not offer ordering online.

All RFQ's and PO's should be e-mailed to:  customerservice@epotek.com where you will receive an e-mail confirmation once we have received your request.

You may also choose to call our main number (978) 667-3805 and ask for Customer Service.

Our fax line is available at (978) 663-9782.

Currently, we do not offer ordering online.

Unfortunately, we do not normally sample our products because they are all made to order.  We do, however, provide small quantities for purchase called Evaluation Kits for relatively low cost.

For additional information on our Evaluation Kits, please contact our Customer Service Department at (978) 667-3805 or customerservice@epotek.com.

If you're experiencing any website problems, please forward your specific issue to us at  salesinfo@epotek.com.

No.  Our US Representatives cannot take orders.  Please contact our Customer Service Department at (978) 667-3805 or customerservice@epotek.com to place your order.

A complete listing of all of our distributors world wide can be found under the "Contact Us" menu item on our home page.  Click the "Find Your Rep/Distributor" choice for the Epoxy Technology  authorized Distributor in your area.

Please contact our Sales & Marketing group to coordinate a visit at salesinfo@epotek.com or (978) 667-3805.

You can find a listing of the tradeshows that we will be exhibiting at on our home page under the "About Us" menu and select "Events".  You may also scroll to the bottom of our home page for an immediate listing.

Our Quality Control department has many different types of instruments including:  DSC, TGA, TMA, DMA, Instron, Microscope, Refractometer, Shore A & D Durometers, FTIR, Hegman Particle Size Analysis, MicroFlash, Dionex, Dage, Various Ovens, Conductivity Analyzer, Microtrack, pH Meter, Viscometers, Volt Meters, Gardener Liquid Color Standards and Pyconmeter.

Many of the above tests are part of our standard lot acceptance testing.  Other tests may be performed as a lab service and for a fee.

We perform viscosity readings based on ASTM Test Method D2393 using a CPE 51 cone and plate on a Brookfield HBT viscometer.  The sample size is 0.55cc where the material is allowed to equilibrate for 6 minutes in a water bath set at 23°C +/- 0.1°C.

For additional information on viscosity measurements, please refer to our Epoxy Adhesive Application Guide:  files/brochures/pdfs/adhesive_application_guide.pdf

Our Quality Control Laboratory is an approved DSCC Certified Laboratory for performing military testing related to MIL-STD 883/5011 as well as ISO 9001:2008.

Epoxy Technology's basic guidelines for shelf life are as follows:

Room Temperature     23°C +/- 3°C

Refrigerator                  5°C +/- 3°C

Freezer                      -40°C +/- 3°C

Yes.  We perform 100% of incoming raw material inspection which includes every drum or container, even with the same lot numbers.

Epoxy Technology performs lot acceptance testing (LAR) on each batch of product.  Since we produce difference types of materials, the LAR testing is designated on each product data sheet with an asterisk.

Yes.  Our Quality Control department provides additional testing (pending approval) for a fee. 

Please contact our Customer Service department at (978) 667-3805 or customerservice@epotek.com for lab test pricing.

Yes.  We keep retains of each and every manufactured batch for one year.

Our average turn-around time is two weeks for a test that is not considered lot acceptance.  This is, however, a general guideline and can take longer depending on the product and test.

FAQ
star
For additional product selection assistance,
tell us about your application and its specific design criteria and a technical service representative will contact you directly.
Spotlight
Featured Products
Press Releases
EPO-TEK Blog Posts
Video Tutorials
  1. FAQs

  2. USA Tradeshows

    USA Tradeshows

    United States
    Date Event Booth Location
    2017
    07-11  to  07-13 Semicon West 5951 Nor San Francisco, CA
    03-21  to  03-23 OFC 2917 Anaheim, CA
    05-02  to  05-02 iMAPS New England Tabletop Boxborough, MA
    06-06  to  06-08 Int'l Microwave Symposium 1901 Honolulu, HI
    05-23  to  05-25 SID 1145 Los Angeles, CA
    02-07  to  02-09 MD&M West 624 Anaheim, CA
  3. GLOBAL Tradeshows

    International Tradeshows

    China
    France
    Germany
    India
    Italy
    Japan
    Korea
    Malaysia
    Philippines
    Singapore
    Spain
    Thailand
    Vietnam
    Date Event Booth Location
    2017
    04-25  to  04-27 Semicon Southeast Asia D1 Penang - Malaysia
    06-21  to  06-24 Nepcon Thailand Bangkok - Thailand
    09-06  to  09-09 China International Optoelectronic Expo (CIOE) Shenzen - China
    09-13  to  09-15 Nepcon Vietnam G2 Hanoi - Vietnam
    11-03  to  11-05 Optics Valley of China International OptoElectronic Exposition and Forum (OVC) Wuhan, China - China
    03-29  to  03-30 LOPEC B0/403 Munich - Germany
    04-04  to  04-06 Medtec 1/1H45 Stuttgart - Germany
    11-14  to  11-17 SEMICON Europa B1/1823 Munich - Germany
    06-26  to  06-29 LASER World of PHOTONICS B1/522 Munich - Germany
    10-09  to  10-12 Bondexpo Stuttgart - Germany
    05-10  to  05-11 Lab-on-a-Chip and Microfluidics C16 Munich - Germany
    05-16  to  05-18 Smt Hybrid Packaging 5/411 Nuremberg - Germany
    04-26  to  04-27 Fraunhofer CAM Workshop 13 Halle - Germany
    05-17  to  05-18 TechnoBond Bad Hersfeld - Germany
    11-14  to  11-17 Productronica A4/n.a. Munich - Germany
    06-21  to  06-23 PSECE 158/159/ Manila - Philippines
    07-28  to  07-29 CSECE 2 Cebu City - Philippines
    02-08  to  02-10 SEMICON Korea C 1778 Seoul - Korea
    04-05  to  04-07 NEPCON G123 Seoul - Korea
mil.jpg